This subsystem controls the Local Oscillator (LO) amplifiers for the reference and measurement channels.
Command tree: [SENSe<Ch>:]LO...
Switches the Local Oscillator amplifier for the measurement channel b on or off.
|
<Ch> |
Channel number. If unspecified the numeric suffix is set to 1.
|
|
<Pt> |
Test port number of the analyzer.
|
|
<Boolean> |
ON | OFF – Switches the LO oscillator on or off. |
|
*RST value |
ON
|
|
SCPI, Command Types |
Device-specific, command or query
|
|
Example: |
LOM1 OFF; LOR1 OFF Switch the local oscillators for the measurement channel b and the reference channel a at port no. 1 off.
|
Switches the Local Oscillator amplifier for the reference channel a on or off.
|
<Ch> |
Channel number.
|
|
<Pt> |
Test port number of the analyzer.
|
|
<Boolean> |
ON | OFF – Switches the LO oscillator on or off. |
|
*RST value |
ON
|
|
SCPI, Command Types |
Device-specific, command or query
|
|
Example: |
LOM1 OFF; LOR1 OFF Switch the local oscillators for the measurement channel b and the reference channel a at port no. 1 off.
|
